Overview - Carrier LonWorks i-Vu Link Integration Manual

Overview

Follow the steps in this document to integrate one or more third party LonWorks controllers using an i-Vu®
Link/Open Link. See the i-Vu® Link/Open Link Installation and Start-up Guide for installation and networking
instructions.
i-Vu® Link/Open Link
LonWorks port
Module driver
Read/write capability
Third party points supported
Third party
Supported equipment
Network media type
Quantity of devices you can
physically connect to the i-Vu®
Link/Open Link
*You can download the latest drivers from the Carrier Control Systems Support Site
http://www.hvacpartners.com/. Check the latest bulletin releases for new or updated drivers.
** UNVT's and nci SNVT's are proprietary and not supported.
The i-Vu® Link/Open Link drivers support LonWorks devices connected to Port S2 and BACnet or Modbus devices
connected on the Ethernet port simultaneously. The third party point count for the i-Vu® Link/Open Link is the
total of the 2 ports.
LonWorks Integration Guide
i-Vu® Link and Open Link
S2
drv_ivulink_lon_6-00-082*
drv_ivuopenlink_std_6-00-082*
Can read from and write to the third-party equipment
500
Any device that supports the LonWorks protocol using
SNVT's**
EIA-232 to SLTA-10 network adapter
1 LonWorks network segment with up to 64 LonWorks
devices, daisy-chained
1
CARRIER CORPORATION ©2018
All rights reserved