Table of Contents
Advertisement
All manuals and user guides at all-guides.com
4.4 Ribbon Feed Troubleshooting
Problem
• Print mode is set to
Ribbon doesn't
wind.
• Wrong ribbon path.
• Ribbon wind direction is
• Ribbon wind tension is
• Tension of ribbon holder
Ribbon wrinkles.
• Print density (heating
• Angle of ribbon guide bar
Note:
the right head pressure by turning the offset adjustment screw to
prevent ribbon from wrinkling.
Cause and remedy
direct-thermal printing.
reversed.
not correct.
and ribbon winder is not
correct.
factor) is not correct.
is not correct.
If narrow paper is used, the ribbon may wrinkle.
4-9
→
Change to the thermal-transfer
printing.
→
Use correct path.
→
Set it properly.
→
Set it properly.
→
Set it properly.
→
Correct the parameter of the Hnn
command with the printing
contents definition mode.
→
Contact our service personnel to
adjust the ribbon guide bar.
Decrease
Advertisement
Table of Contents
Troubleshooting
