Citizen CLP-6001 User Manual page 27

All manuals and user guides at all-guides.com
Voltage setting mode
T
In the voltage setting mode, operate the paper gap and black line adjustment
controls so that the voltages of both "PE" and "BL" displayed on the LCD screen
read 3.0 V−3.3 V.
Setting procedure:
1 Sets only the liner (glassine paper) that has been peeled off the label paper.
2 Sets the paper gap level to 3.0 V−3.3 V (paper gap comes first).
3 Sets the black line level to 3.0 V−3.3 V (then black line).
Note: The order of steps 2 and 3 above may be reversed.
2-6