Ribbon Setting - Citizen CLP-6001 User Manual

All manuals and user guides at all-guides.com

3.5 Ribbon Setting

CAUTION
After opening the cover, set the ribbon as follows:
1 Push down the open lever 1 to move the print head out of the way.
2 Insert the ribbon shaft
Then set it in the ribbon holder as shown in the figure.
3 Insert the ribbon shaft
position.
4 Adhere the top end of the ribbon to the paper core with adhesive tape.
the ribbon winder in the direction ribbon winding to remove slackness and
wrinkles from the ribbon.
5 Press down the ribbon bearing flat
The open lever hook will lock.
6 Close the cover.
7 Turn on the power to the printer.
display "On line."
label and stop there.
11
12
Direction of ribbon winding
1
Be careful of the edges of the plates so injury or
property damage is possible.
in the roll ribbon so that it is in its deepest position.
11
in the paper core
12
Then set it in the ribbon winder as shown in the figure.
Press the Feed key.
Ribbon
13
3-9
so that it is in its deepest
13
to close the print head.
10
The LCD screen on the control panel will
The paper will advance to the next
Print head opened
Roll paper
Ribbon
Completion of setting paper and ribbon
Turn