All manuals and user guides at all-guides.com
2.6 System Maintenance Mode
The printer enters the system maintenance mode when the Pause, Feed and Stop
keys are pressed and held down simultaneously while turning the printer on.
[Functions]
Holding down the Pause, Feed and Stop keys simultaneously for more than four
seconds after turning on the power allows the memory switches to be set to default
values (*).
The printer enters the communication parameter setting and paper gap and black
line sensor sensitivity adjusting mode.
The mode is selected with the Pause key and the mode item is selected with the
Feed key.
Changing of the contents is executed as soon as they are displayed on
the screen.
Pressing the Stop key returns the printer to the normal operating mode.
Pause:
T
Feed key:
T
Mode item
* Default values
RS-232C setting
Print mode setting
Optional functions
Paper sensor setting
Model
Mode selection
Item selection
Baud rate:
Data length
Transfer
Peeling:
Auto-cutter: OFF
Tear-off:
Edge
Native ON
2-5
Indication
9600 bps
OFF
OFF