Step 6
Note: Use the ADVANCED DIAGNOSTIC SELECTION menu to
choose the additional test. If needed, see page 2-15.
1. Run any "Additional Tests" listed for your SRA number that you have
not run since starting to analyze this SRN. If you are not able to select
and run the additional tests, go to page 3-22.
2. Record the result of each additional test. Each test ends with a "No
trouble was found" message or the test displays an SRN.
DIAG-2
3-10
Service Manual
WRITE •••..•. down the above number.
RETURN ...... to the Hardware Maintenance and Service Manual.
DID ANY ADDITIONAL TEST RESULT IN A SERVICE REQUEST
NUMBER?
NO
Go to "Step 16" on page 3-20.
YES
Continue on the next page.