IBM RT PC 10 Hardware Maintenance And Service page 11

x Service Manual
Section 7, "Diskette Drive" contains a description, specifications,
terminator resistor setting, and parts information for the diskette drive.
Section 8, "Fixed-Disk Drive" contains a description, specifications,
terminator resistor setting, and parts information for the fixed-disk drive.
Section 9, "Adapters" contains a description, specifications, switch or
jumper settings, and parts information for each adapter used in the system
unit.
Section 10, "User Input Devices" contains a description, specifications, a
removal procedure, a replacement procedure, and parts information for each
type device used to input data or commands.
Section 11, "Displays" contains a description, specifications, control
adjustment procedures, and parts information for each IBM display used
with the IBM PC RT Model 10.
Section 12, "Tape Drive" contains a description, specifications, and parts
information for the tape drive used with the IBM PC RT Model 10.
Appendix A, "Tool Requirements" contains descriptions of the tools needed
to service the IBM PC RT Model 10.
Appendix B, "SRA to FRU Cross-Reference List" contains a list of each
Service Repair Action (SRA) number and the part number and part name of
the field-replaceable unit it represents. This list is in SRA number order.
A Reader's Comment Form and Book Evaluation Form are provided at the
back of this book. Use the Reader's Comment Form at any time to give
IBM information that may improve the book. After you become familiar
with the book, use the Book Evaluation Form to give IBM specific feedback
about the book.