IBM RT PC 10 Hardware Maintenance And Service page 166

91x
Attached Devices
Run the Advanced Diagnostic Routines checkout on the adapter for
the failing device.
If the checkout ends with the message "No trouble was found," go to
the maintenance package for the attached device.
If the checkout ends with an SRN, use the right-most digit of the SRA
to determine the adapter slot position. If needed, see page 2-19.
9Sx
FRU: mM PC Network Components
Additional Tests: None
Removal Procedure: See the Setup Instructions for the IBM PC
Network Transformer and Translator Unit.
Exchange either the translator, power
transformer, power cord, or the connection
hardware. See Section 9 for parts reference.
Repair Checkout: Run the PC Network Adapter Checkout.
981
POST Error 03 or 05
Do not return to the Start of Call PIC, go to "POST Errors 03 or 05
PIC 9810" on page 3-79.
Problem Isolation Charts 3-121