IBM RT PC 10 Hardware Maintenance And Service page 74

Step 8
Look at the displayed information.
01 AGNOST! C TEST LI ST
The following options will be tested by the Diagnostic Routines.
Slot B - Floating Point Accelerator
Slot 1 - Fixed-disk and Diskette Drive Adapter
Slot 2 - Advanced Monochrome Graphi cs Di sp 1 ay Adapter
Slot 4 - Streami ng Tape Adapter
Slot
5 - 4
Port Asynchronous RS232C Adapter
1
Slot 7 - 4 Port Asynchronous RS232C Adapter 2
Slot 8 - AT Coprocessor
XXX bytes of I/O Channel Memory starting at address O.
Diskette Drive in location A - AT High Capacity Diskette Drive
Fixed-disk Drive in location C - 40 MB Fixed-disk Drive
To see additional items in the list, use Page Up and Page Down .
.ill
ITEM
1 The list is correct.
2 The list is incorrect.
To choose an item, type its 10 and press Enter: _
DIAG-l
DID THE "DIAGNOSTIC TEST LIST" MENU DISPLAY?
YES
NO
Follow the displayed instructions to correct the list. When the
"ADVANCED DIAGNOSTIC SELECTION" menu displays,
continue on the next page.
Go to "Step 35" on page 3-58.
Problem Isolation Charts 3-29