IBM RT PC 10 Hardware Maintenance And Service page 65

Step 16
3-20 Service Manual
The advanced diagnostic routines did not detect a problem. The problem
maybe:
• An incorrect SRN
• An intermittent problem
• A procedural problem
• A software problem
• A problem that no longer fails
• An Undetermined problem.
Do one or more of the following actions to further analyze the problem:
• If the problem is an incorrect SRN, go to "Problem Determination
Procedure" on page 3-22 and follow the procedure until you get a SRN,
then analyze it.
• If the problem is intermittent, run the advanced diagnostic routines in
loop mode. Do this by selecting "Run Test Multiple Times" on the
TEST METHOD SELECTION menu.
• If the problem is a software or a procedural problem, have the customer
use the Problem Determination Guide to resolve the problem.
• If the problem is an undetermined problem, go to "Undetermined
Problem PIC 9860" on page 3-104.