Epson ColorWorks C6500Au Technical Reference Manual page 92

• Settings for AztecCode
∗ Type:
∗ Cell Size:
∗ Number of Layers:
∗ Error Correction Area:
• Settings for DataMatrix
∗ Symbol Shape:
∗ Error Correction Level:
∗ Cell Size:
∗ Number of Vertical Cells:
∗ Number of Horizontal Cells:
3
Click [Add].
The configured 2D symbol font is registered and added to the font list.
• Up to 30 2D symbol fonts can be registered.
• To edit settings of a registered 2D symbol font, select the font from the font list, change the
settings and then click [Save].
• To delete a registered 2D symbol font, select the font from the font list, and then click [Delete].
Select a type of AztecCode.
Select a size of a cell (module) of AztecCode.
For the recommended value, see
Specify the number of layers of AztecCode.
Select any one of the following error correction area settings for AztecCode. This
allows the symbol data to be correctly read even if a portion of the symbol is
missing or damaged. The larger the number is, the higher the possibility of data
restoration gets.
[Auto]: the default is 23%+3 code words.
[Specify a Percentage]: Enter a percentage of error correction area into the entry
field.
Select a shape of DataMatrix symbol.
Specify an error correction level for DataMatrix.
Select a size of a cell (module) of DataMatrix.
For the recommended value, see
Specify the number of cells of DataMatrix in the vertical direction.
Set this when you have selected [Rectangle] in the DataMatrix [Symbol Shape]
setting.
Specify the number of cells of DataMatrix in the horizontal direction.
Set this when you have selected [Rectangle] in the DataMatrix [Symbol Shape]
setting.
[Minimize]: The number of cells is automatically optimized and minimized.
[Specify the Size]: The number of cells is set according to the selected size.
"Recommended Module Values" on page 93.
"Recommended Module Values" on page 93.
Chapter3 Handling
92