Epson ColorWorks C6500Au Technical Reference Manual page 74

8 Print Quality
Select the print quality.
When [Media Type] is [Matte Paper] or [Synthetic]
• High Speed: 300 x 600 dpi
• Speed: 600 x 600 dpi
• Standard: 600 x 600 dpi (initial setting)
• Quality: 600 x 1200 dpi
When [Media Type] is [Glossy Paper], [Glossy Film], or [High Glossy Paper]
• Standard: 600 x 600 dpi
• Quality: 600 x 1200 dpi (Initial setting)
• Max Quality: 1200 x 1200 dpi
If you change the [Media Type] setting, the [Print Quality] setting will automatically be
set to the initial setting suitable for the selected paper type.
• Click the [Advanced] button to configure more detailed print quality settings.
9 Color Correction Mode
Configure color correction settings. For more details about the color correction, see
page 160.
• Vivid colors: click [Color Correction] to customize the color settings.
• ICM: click [Color Correction] to select an ICC profile.
• No composite: no color correction is applied.
10 Spot Color Setting
Select a spot color setting file. For more details about the spot color setting, see
page 154.
11 Settings For Paper Handling After Print
For the Auto Cutter Model
• Cut (after printing last label)
• Cut (at specified label)
• Cut (after last page of collate page)
• Do not cut (stop at cut position) (Initial setting)
• Do not cut (stop at peel position)
• Do not cut (stop at the print end position)
For the Peeler Model
• Manual apply (Initial setting)
• Auto apply
• Rewind
If you have set to [Cut (after last page of collate page)] and printing is interrupted
c
due to a paper jam or other reason, it is impossible to resume printing from the
stopped position.
IMPORTANT
Chapter3 Handling
"Color Correction" on
"Spot Color Settings" on
74