Epson ColorWorks C6500Au Technical Reference Manual page 80

• Rotation Settings:
• Hexadecimal Input Mode:
• Module:
• Bar Height:
• HRI Character Position:
Depending on the selected barcode type, the position option cannot be selected.
• Composite Component:
• Element Ratio:
• Check Digit:
• Auto Convert to Minimize Entire Symbol Width:
• Start Character:
• Stop Character:
2
Click [Add].
The configured barcode font is registered and added to the font list.
• Up to 30 barcode fonts can be registered.
• To edit settings of a registered barcode font, select the font from the font list, change the set-
tings and then click [Save].
• To delete a registered barcode font, select the font from the font list, and then click [Delete].
Select an option to rotate a barcode.
Select the check box to enter data for a barcode in hexadecimal.
Specify the width of the narrowest element of the barcode in units of dot.
Specify the height of the element in units of dot. Actual print size equivalent to
the specified dots will be displayed.
Specify the position to print HRI characters. Select [Do Not Print] if printing
HRI characters is not necessary.
Select a composite type.
Specify the ratio of wide element width to the narrowest element width.
The recommended ratio is 2.5.
A number or symbol added to the barcode number in order to detect an error in
the barcode number and to prevent fabrication.
You can select this when the barcode type is CODE128. This function minimizes
the number of symbols and characters that are necessary to express the specified
data string.
Specify the start character.
Specify the stop character.
Chapter3 Handling
80