Table of Contents
Advertisement
GS1-128
• '()' are used as delimiters for the application identifiers. (printed as the HRI character, but not encoded.)
• A start code (CODE A, CODE B, CODE C) and a stop code will be automatically added.
• A symbol character FNC1 is automatically added next to the start code.
• If you use "*", it will be skipped.
• As an application identifier, specify a two-digits consecutive number. If the identifier is not specified cor-
rectly, an error will occur.
• A special character is expressed by a combination of { and the next character.
• If data immediately after { does not apply to any one of the followings, an error will occur.
Control character
Control character (00h to 1Fh, and 7Fh)
FNC1
'{'
'('
')'
'*'
Beginning parenthesis for an application identifier
Closing parenthesis for an application identifier
Skipped character
GS1 DataBar Omnidirectional / GS1 DataBar Truncated / GS1 DataBar Limited
• The first "01", an application identifier, is not encoded (not included as the barcode data).
• When the HRI character is printed, the application identifier 01 is printed as "(01)" before the package iden-
tification code.
• You do not need to add a check digit in the barcode data.
• When the HRI character is printed, a check digit will be automatically printed after the product code.
• For GS1 DataBar Limited, specify 0 or 1 for the first digit.
ASCII
HRI character
A space is printed.
{1
A space is printed.
{{
{ is printed.
{(
( is printed.
{)
) is printed.
{*
* is printed.
(
( is printed.
)
) is printed.
*
Not printed
Chapter3 Handling
87
- Quick Links:
- Manuals for this Product
Hide quick links:
Advertisement
Table of Contents
