Table of Contents
Advertisement
GS1 DataBar Expanded
• '()' are used as delimiters for the application identifiers. (printed as the HRI character, but not encoded.)
• Be sure to include all the application identifiers in the data.
• If the first data is "01" when an application identifier, left and right parentheses, and * are excluded, the 14th
digit counted from the digit next to "01" is used as the check digit. If the data is incorrect, an error will occur.
• If the number of digits after "01" is less than 14, a check digit is not added.
(Unlike GS1-128, a symbol "*" cannot be used for automatic calculation and addition of a check digit. If "*" is
added in the data, it will be ignored and the subsequent data is shifted by one digit.)
• Specify a special character as described below.
Control character
FNC1
Beginning parenthesis for an application
identifier
Closing parenthesis for an application iden-
tifier
'*'
Skipped character
'{'
ASCII
HRI character
{1
Not printed
(
( is printed.
)
) is printed.
{*
Error
*
Not printed
{{
{ is printed.
Chapter3 Handling
88
- Quick Links:
- Manuals for this Product
Hide quick links:
Advertisement
Table of Contents
