Table of Contents
Advertisement
8.
Never attempt to cut more than one
workpiece at a time.
9.
Do not attempt to cut freehand.
Make sure the workpiece to be cut is
pressed firmly against the Table and/
or secured in the Vise.
10.
When cutting a large workpiece, make
sure its entire length is properly sup-
ported. If necessary, use a roller
stand (not included).
11.
Do not lean on the Bandsaw when the
tool is in its upright position.
12.
When moving the Bandsaw, always
have its Head lowered to its horizontal
position and the Locking Pin inserted
in the Pivot.
13.
Allow the Saw Blade to rotate to full
speed before feeding a workpiece
into the Blade. When turning off the
Bandsaw, allow the Saw Blade to spin
down and stop on its own. Do not
press against the Blade to stop it.
14.
To avoid accidental injury, always
wear heavy duty work gloves when
changing the Saw Blade.
15.
The Saw Blade will become hot while
cutting. Allow the Blade to completely
cool before handling.
16.
Do not force the workpiece into the
Saw Blade when cutting. Apply mod-
erate pressure, allow the Saw Blade
to cut without being forced.
17.
Turn off the Bandsaw and allow the
Saw Blade to completely stop if the
Blade is to be backed out of an un-
completed cut.
18.
Never attempt to remove material
stuck in the moving parts of the Band-
saw while it is plugged in and running.
SKU 66435
For technical questions, please call 1-800-444-3353.
19.
Make sure the workpiece to be cut
off has sufficient room to move side-
ways. Failure to do so may result
in off-cut binding against the Saw
Blade.
20.
Keep all safety guards in place and in
proper working order.
21.
CAUTION: If the teeth of the Saw
Blade are so far apart that they
straddle the workpiece, severe dam-
age to the workpiece and/or Saw
Blade will result.
22.
Maintain labels and nameplates on
the Bandsaw. These carry important
safety information. If unreadable or
missing, contact Harbor Freight Tools
for a replacement.
23.
Avoid unintentional starting. Prepare
to begin work before turning on the
Bandsaw.
24.
Do not leave the Bandsaw unat-
tended when it is plugged into an
electrical outlet. Turn off the tool,
and unplug it from its electrical outlet
before leaving.
25.
This product is not a toy. Keep it out
of reach of children.
26.
Industrial applications must follow
OSHA guidelines.
27.
People with pacemakers should
consult their physician(s) before use.
Electromagnetic fields in close prox-
imity to heart pacemaker could cause
pacemaker interference or pacemak-
er failure. In addition, people with
pacemakers should:
• Avoid operating alone.
• Do not use with power switch
locked on.
• Properly maintain and inspect to
Page 6
Advertisement
Table of Contents
