Central Machinery 66435 Set Up And Operating Instructions Manual page 17

cal position. NEVER attempt to cut
pipes or hollow round objects with the
Bandsaw in its vertical position.
3. Raise the Body Frame (126) to its full
vertical position, making sure it locks
into place by turning the Support
Plate ((31) to the right until it firmly
locks into the Body Frame.
(See Figure S.)
FIGUrE S
SUppOrT pLATE
(31)
4. Remove the two Cross Head Screws
(87) from the Lower Blade Guard (9).
(See Figure T.)
SKU 66435
BODY
FrAME
(126)
For technical questions, please call 1-800-444-3353.
CrOSS HEAD SCrEWS
5. Attach the Vertical Cutting Support
Plate (98) to the Vertical Cutting Plate
(99) using one Cross Head Screw
(87), one Washer (63), and one Hex
Nut (100). (See Figure U.)
CrOSS
HEAD
SCrEW
(87)
VErTICAL
CUTTING
pLATE
(99)
6. Guide the Saw Blade (86) through the
slot in the Vertical Cutting Plate (99),
(87)
FIGUrE T
HEx NUT
WASHEr
(100)
(63)
VErTICAL
CUTTING
SUppOrT
pLATE
(98)
FIGUrE U
Page 17