Installation Instructions; Unpack The Refrigerator; Move The Refrigerator Into House - Jenn-Air JB36NXFXLE Install

Bottom mount built-in refrigerator
Hide thumbs Also See for JB36NXFXLE:
Table of Contents

Advertisement

Available languages

Available languages

UNPACK THE REFRIGERATOR

WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
IMPORTANT:
 Do not remove the film covering until the refrigerator
is in its operating location.
 All four leveling legs must contact the floor to support
and stabilize the full weight of the refrigerator.
 Keep the cardboard shipping piece or plywood under
the refrigerator until it is installed in the operating
location.

INSTALLATION INSTRUCTIONS

1.
Remove and save the literature package and
hardware kit located inside the refrigerator. Remove
and save the literature, grille, and trim taped to the
outside of the refrigerator.
NOTE: Do not remove tape and door bracing until the
refrigerator is in its final location.

MOVE THE REFRIGERATOR INTO HOUSE

WARNING
Tip Over Hazard
Refrigerator is top heavy and tips easily when not
completely installed.
Keep doors taped closed until refrigerator is
completely installed.
Use two or more people to move and install
refrigerator.
Failure to do so can result in death or serious injury.
13

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jb36nxfxreRise jb36nxfxleJf42nxfxdeJf36nxfxdeRise jf42nxfxdeRise jf36nxfxde ... Show all

Table of Contents