Icom IC-7000 Manual page 33

on, push the set button (volume control) once again. The TV receiver will now
come on.
It is advisable to switch on the preamplifier.
By using the Band up and down buttons you can change TV channels, select a
channel.
To change the frequency press the ADJ button and tune in the station using
your VFO knob. You can do quick frequency movements by pressing the TS
button.
Once you have found a station (audio only) press SET at the bottom of the
screen. You should now see a picture.
You can now fine tune the picture by rotating the VFO knob.
Once everything is tuned perfectly press the volume control (set) button to store
the station into the channel number previously selected.
ACKNOWLEGEMENTS
I wish to thank my son Quintin ZS6IY for his help with the soldering of these
minute components using his hot air soldering station (surface device soldering
station).
OM Eddie Leu ZL3TEL for his assistance and photos of the New Zealand
expanded frequency range.
OM Paul Hayden VK4ZBV for information on the Australian and South
African audio frequencies.