Operation - Icom IC-7000 Manual

New Diode positions
Step 8

OPERATION

Connect the power supply to the radio and couple a TV antenna terminated in a
PL259 plug to the VHF antenna socket of the radio. (Right hand side of the
radio as seen from the front looking towards the back).
When you switch the power on a warning message will appear on the blue
screen. Press Yes that you acknowledge the warning.
The radio reverts to the original frequency you had the radio on before
embarking on the modification.
To activate the TV receiver push and hold in the set button (Volume control
situated at the top left hand side of the radio). If the TV receiver does not come