Epson Stylus PHOTO 950 Service Manual page 40

EPSON Stylus PHOTO 950
Step 4 : ASF Reset Operation
11. Once a loaded paper is completely printed and ejected, printer will perform the
ASF reset operation if the next printing data does not input for a few seconds. Note
that the printer will not perform the ASF reset operation if the printing data
continues transferring after a 1 st
details.
11-1. Stopping the Print Data for a few seconds
If the printer does not receive print data for a few seconds after ejecting a
1st paper, "silence cam" will rotate to counter clockwise direction, and
will soon change its direction to clockwise direction to make the ASF
return to its stand-by condition shown No.1.
After completing this reset operation, user can install more enough papers
from the front side of the current installed papers. (maximum 150 sheets
of normal plain papers) Because the hopper status is in the same
condition to Step 1.
11-2. For the Continue Printing
In case the print data continues transferring from PC as soon as 1
is ejected, LD roller will rotate to counter clockwise direction again and
same operation from Step 5 to Step 10 are performed until the print data
is completely printed.
OPERATING PRINCIPLES
paper is printed and ejected. Following is its
st paper
Figure 2-22. Silence Cam mechanism (7)
Printer Mechanism
Case of 11-2
1 2 1
Case of 11-1
2
Revision A
40