Physical Specification - Epson Stylus PHOTO 950 Service Manual

EPSON Stylus PHOTO 950
Fatal error
Carriage control error or CG access error.
Adjust lever position error
It is made error when Adjust lever is in the integrity of a release.
It is made error when printout mode isn't suitable toward the platen gap.
Panel should invalidate it at the time of the error, and printout becomes
cessation.
Paper thickness error
When the gap between the printer head and a piece of paper is too narrow
because the piece of paper set to the printer is thick, the printer indicates Paper
thickness error. And it stops printing.
Double feed error
When pieces of paper are piled up on ASF in double-side printing mode, or
when the printer detects paper deviation, it indicates Double feed error. And it
stops printing.
Cutter position error
It is made error when the cutter doesn't return to the Home position after the
cutter action or after Mechanical initializing.
Cutter jam error
When the printer can't cut paper in enabling cutter mode, it indicates Cutter
jam error.
NOTE: Refer to 1.3.6 "Printer condition and Panel status" for details on each
indicator.
PRODUCT DESCRIPTION

1.4 Physical specification

DIMENSIONS
515mm (W) × 332.8mm (D) × 209mm (H)
515mm (W) × 663mm (D) × 299mm (H)
515mm (W) × 626mm (D) × 299mm (H)
WEIGHT
Normal Weight
Weight with Cutter
PHYSICAL DIMENSIONS
299
663
Physical specification
: Storage
: Printing
: Used cutter
: 7.6kg
: 8.6kg
Figure 1-7. Physical dimensions
Revision A
515
24