Cleaning And Maintenance - ResMed VPAP II User Manual

C
LEANING AND
D
AILY
Disconnect the air tubing and mask. Wipe the inside and outside of the mask and
cushion with a clean damp cloth.
Hang them up to dry in the shade—not in the sun, as the tubing may harden and
crack over time.
W
EEKLY
Handwash the mask and air tubing with mild detergent. Refer to the instructions
supplied with your mask system for complete instructions.
Handwash the headgear with mild detergent and drip dry out of direct sunlight.
Check the mask outlets for blockages.
P
ERIODICALLY
The exterior of the flow generator should be cleaned with a slightly damp cloth
and mild detergent.
WARNINGS
Beware of electric shock. Do not immerse the flow generator or power cord in
water. Always unplug the flow generator before cleaning and be sure that it is dry
!
before plugging it back in.
Do not use bleach-, chlorine-, alcohol- or aromatic-based solutions (including
scented oils) to clean the cushion, mask or air tubing. These solutions may cause
damage that is not visible.
The mask and air tubing are subject to normal wear and tear. Inspect them
regularly for damage.
M
AINTENANCE
C M
LEANING AND AINTENANCE
17