Assembly - ResMed VPAP II User Manual

A
SSEMBLY
1
Place the flow generator on a table near the head of your bed.
CAUTION Be careful not to place it where it can be bumped over, or where someone may
trip over the power cord.
!
2
Plug the power cord into the power socket at the back of the flow generator.
3
Plug the other end of the power cord into a mains power outlet.
4
Assemble your ResMed mask system according to the user instructions supplied
with the mask.
If you are using a humidifier, please refer to the connection instructions in the
user's manual supplied with the humidifier.
7
A
SSEMBLY