Cleaning And Maintenance; Cleaning The Reslink; Cleaning The Oximeter; Cleaning The Oximeter Sensor - ResMed Reslink User Manual

CLEANING AND MAINTENANCE

CAUTION
Avoid exposing the

CLEANING THE RESLINK

If
necessary, wipe

CLEANING THE OXIMETER

I
. If necessary, wipe
or a mild detergent.
2. Dry with a soft cloth or allow to air dry.
Note: The oximeter cable and Xpod connector can be wiped with a clean cloth.
CAUTION
Do not autoclave or immerse this device in liquid or use caustic or abrasive cleaning
agents or any cleaning products containing ammonium

CLEANING THE OXIMETER SENSOR

For instructions on cleaning the
supplied
WARNING
Do not use liquids to clean any part of the
•
Do not attempt to dismantle the
•
attempt to service or repair the device
parts
agent.
12
Reslink to moisture and extreme
the outside of the RES
the surfaces
with this device.
inside. Inspection and repair should only be performed by an authorised
LINK with a clean cloth.
with a soft cloth dampened
oximeter sensor, please refer to the
Re sLink.
Reslink. Under no circumstances should you
yourself.
temperatures.
with isopropyl
chlori d e.
user guide
There are no user serviceable
alcohol