Mute Setting; Selecting A Sound Type; Selecting A Preset Sound Mode; Changing Programs - BenQ VK Series User Manual

Mute setting

• Press
Mute
• Press
Mute
on the TV to restore the sound level.

Selecting a Sound Type

If you are watching a TV program that supports multi-lingual or multi-
channel sound broadcasting, press
switch between available audio languages or channels.

Selecting a preset Sound Mode

Press
Sound Mode
from
Standard
Sound Mode to suit your preference. See
User
Mode" on page

Changing programs

Selecting a program directly

You can also change to a program directly by selecting the station number
using the numeric program selection button(s) on the remote control. For
example, to select program 8, press
28, press

Changing programs sequentially

You can sequentially change TV programs by pressing the following buttons:
•
P (Program)
• or on the remote control, or
• or
CH CH

Returning to the previous viewed program

When viewing a TV program, you can press
to quickly return to the previous viewed program. This button can be used to
toggle between the two most recently viewed programs without having to
enter the precise program number.

Displaying information

Press
INFO (Information)
signal information. The information displayed varies according to the input
source being selected.

Adjusting backlight

To adjust the intensity of your TV's backlight system, press
the remote control, and then press
When viewing the TV in dimly lit rooms it is recommended to reduce the
backlight which will reduce the image brightness and make the dark areas of
the image darker, thus maintaining a high contrast image in a dark
environment.
30 Using the remote control
on the remote control to turn off the audio temporarily.
again, or press
on the remote control to select a suitable Sound Mode
, , ,
Music Movie Speech
37.
, followed by
or
P (Program)
on the TV.
on the remote control to display the input
on the remote control or
(Volume) +
on the remote control to
Sound Type
and . You can also customize the
User
"Setting up the User Sound
, followed by
.
on the remote control, or
Recall
or to select a suitable level.
VOL+
. To select program
on the remote control
on
Backlight