Installing The Stand; Before You Start - BenQ VK Series User Manual

4. Installing the stand

Before you start

Please pay attention to the following before installing the stand:
• For safety reasons, the installation should be performed by at least two adult
persons.
• The TV's LCD panel is extremely fragile and can become damaged easily.
Avoid touching the panel when installing or moving the TV, and be careful
not to let any objects come into contact with the panel. It is recommended
that you use a soft, clean and lint-free towel to cover the TV when installing.
• Pay attention to the stability of the location where the TV will be placed.
Otherwise the TV may topple over and result in damages and personal
injuries. Have a qualified technician secure the TV appropriately in case there
is an earthquake.
Installing the stand
1. Locate the TV, stand and screws
from the packaging, and have a
suitable screwdriver ready.
2. Lay a soft, clean, dry and lint-free
cloth on a flat, horizontal and
object-free table surface, and place
the TV with the screen side facing
downward on the cloth. Align the
bottom side of the TV along the
table edge.
3. As illustrated, attach the stand onto the TV. Make the wider side on the
stand face downward when inserting.
4 Section 1: Quick Start Guide
(VK3211)
Make the wider
side face
downward
TV
Stand (VK3211)
TV
Table Cloth
(SK3731)
Screws
Stand (SK3731)
Align the bottom
side along the
table edge
Make the wider
side face
downward