Connecting The S-Video Input - BenQ VK Series User Manual

Connecting the S-Video input

DVD player
1. Connect the S-Video output of your source device (like a DVD player) to the TV's
jack using an S-Video cable (not provided). Pay attention to the
S-VIDEO
alignment of the plugs on the S-Video cable when inserting so as not to damage
any pins.
2. Connect the S-Video audio output of the source device to the
(white)/ (red) input jacks using a suitable RCA type audio cable (not provided).
R
To view video image from this input, press the
control and select
Video 1S.
You should not connect both a composite Video and an S-Video from the same
device; just one or the other. If you have the choice, use the S-Video instead of
composite Video as an S-video signal provides a higher quality signal to that of
composite Video.
20 Connecting audio and video inputs
S-Video cable
Audio cable
button on the remote
INPUT
VIDEO 1 AUDIO L