Page 1
For RO to input specific “Legal Requirement” in specific NS regarding to responsibility and liability statements. Please check BenQ’s eSupport web site, http://esupport.benq.com, to ensure that you have the most recent version of this manual. First Edition (May , 2007)
Introduction This section contains general service information, please read through carefully. It should be stored for easy access place. Important Service Information RoHS (2002/95/EC) Requirements – Applied to all countries require RoHS. The RoHS (Restriction of Hazardous Substance in Electrical and Electronic Equipment Directive) is a legal requirement by EU (European Union) for the global electronics industry which sold in EU and some counties also require this requirement.
Page 4
Compliance Statement Caution: This Optical Storage Product contains a Laser device. Refer to the product specifications and your local Laser Safety Compliance Requirements.
General Descriptions This Service Manual contains general information. There are 2 levels of service: Level 1: Cosmetic / Appearance / Alignment Service Level 2: Circuit Board or Standard Parts Replacement Related Service Information BenQ Global Service Website:http://support.benq.com/front/benqmain.asp support Website:http://bqpgsr.benq.corp.com/customize/asplogin.asp...
Product Overview Specification 1. Introduction This specification describes a 22" diagonal LCD TV with aspect ratio of 16:10 which supports up to 1680 x 1050 format and can display true 16.7M colors ( 8-bit/color) . This LCD TV is very thin and completely free from electromagnetic distortion.
Page 7
- User controls: on/off switch, key pad with input select, menu, channel up, channel down, left( - ), right ( + ) - IR remote controller - Fancy OSD (on screen display) for user control interface - Color indicator for power on/standby (8).
Page 8
2. Operational Specification 2.1 Environment 2.1.1 Temperature: 0 °C ~ 40 °C Operating -20 °C ~ 60 °C Storage 2.1.2 Humidity: Operating 20% ~ 85% non - condensing Storage 10% ~ 90% non- condensing...
Page 9
Transportation Test Result Step Check Items NO.1 NO.2 FOS Test Packaged Random Vibration Test FOS Test Packaged Drop Test FOS Test Unpacked Vibration Test FOS Test Drop Height (bottom side; Drop Height (other sides; Package Product Weight Corner; and Edge close to and edge ) (Kg) bottom side )
Page 10
Test Sweep Frequency (Hz) Slope (dB/Oct) PSD (G /Hz) 5~100 0.015 100~200 0.0038 Packaging Configuration Testing with vibration shall be done in each of three mutually perpendicular axes. Axes are referenced to the position of system as it normally sits in front of user, i.e., Front-to-back, side-to-side and top-to-bottom.
Page 11
ITEM S/N: S/N: Result Before After Test Before After Test Test Test Function check (Under at dark room) Appearance check Inner check...
Note: If BenQ defect undefined failure, and it judged that is reduce the merchandise ability, BenQ CM Inform this defect. After that parties make communication and decide how to solve. 6.0 CLASSIFICATION OF DEFECTIVES A defective is a product, which contains one or more defects. The defective will be classified into following...
Page 17
7.0 EXPRESSION OF DEFECTIVES Number of defects Percent of defects = ------------------------------------------ X 100% Number of products inspected 8.0 INSPECTION STANDARD Unless otherwise specified, the inspection standard will be defined by SINGLE SAMPLING PLAN. Level Ⅱ is in use all the time, inspection levels are normal, reduce and tighten. Acceptance Quality Level 8.1.1 When a critical defect is found, this must be reported immediately upon detection, the lot or batch shall be rejected and further shipments shall be held up pending instructions from the responsible person in relevant...
Level 1 Cosmetic / Appearance / Alignment Service Visual Inspection ITEM Equipments Requirement Procedure and SPEC Program Menu 1. voltage confirming Digital models Opposite white checks screen 1. Using voltage model to measure output place, checking whether voltage is right.. 1697 1280*800/60Hz 2.
Page 19
Press" SOURCE" Key and select" PC or Pattern Generator 5 Opposite white checks screen 3.VGA adjustment VGA". (Factory mode) 1697 1280*800/60Hz Check if each Timing can display 1997 1440*900/60Hz normally. 2297/2097 1680*1050/60Hz If there is a mode can not work after shift, below 32 grey scale pictures.
Page 20
PC or Pattern Opposite white checks screen 1.Press CH▲▼ Key to choose Contrast. Generator 1697 1280*800/60Hz b. Contrast 2. Press VOL▲ Key Set upon clients 1997 1440*900/60Hz requirements . 2297/2097 1680*1050/60Hz PC or Pattern Opposite white checks screen 1. Press CH▲▼Key to choose Scale. Generator 1697 1280*800/60Hz c.
Page 21
PC or Pattern Full white picture 1. Press MENU Key to open OSD. Generator 1697 1280*800/60Hz 2. Choose picture. 1997 1440*900/60Hz 3. press CH▲▼Key to select Color temp. 2297/2097 1680*1050/60Hz 4. press VOL▲ Key to enter 5. press VOL▲ Key to choose Cool. d-b.
Page 22
PC or Pattern Preset mode 1. Press CH▲▼Key To Select Time Out. b. Time Out setup Generator 2. Press VOL▲▼Key set upon clients requirements Default is 15 s. FLUKE 54200 1. Press Source Key to enter OSD. Full polychrome 2. Press CH▲▼Key to select YPBPR .
Page 23
1. DVD PLAYER 1. Press SOURCE Key to choose AV. 2. VG-848 2. According to signal source, doing picture and volume test. 3. FLUKE 54200 3. Press MENU to open OSD. 6.2 AV testing 4. Press CH▲▼Key to select and press VOL▲ Key to enter.
Page 24
1. DVD PLAYER 1. Press SOURCE Key to select S-VIDEO. 2. VG-848 2. According to signal source, doing picture and volume test. 3. FLUKE 54200 3. Press MENU to open OSD. 6.6 S-VIDEO testing 4. Press CH▲▼Key to select and press VOL▲ Key to enter ,after that ,doing each function and confirm whether each function is right.
Page 25
8.1 Sound mode 1. Press CH▲▼Key to choose Sound mode. 2. Press VOL▲▼Key set upon clients requirements. Default is User. 8.2 Bass 1. Press VOL▲▼Key set low pitch dimension. 2. When leaving the factory, it is settled 50 8.3 Treble 1.
Page 26
function PC or Pattern Generator D620 DDC Test Card DDC Tester direct through signal line to get checking into machine EEPROM to save and take data. to confirm data whether is right value PC or Pattern Generator 1. Make BRIGHTNESS and CONTAST shift to adjustment the mix and black picture,to measure the mix brightness.
Software Upgrade Process MStar ISP Tool Guide Accessory: Tool PCB*1 PCS, USB Cable*1 PCS, D-SUB Cable*1 PCS. USB Tool Driver, MStar IPS Utility, MStar ISP Tool Guide Step1: Connect TV, Tool PCB and PC; TV is Power ON Connect to TV Connect to PC USB Port Step2: Install Tool PCB Driver:...
Page 34
Note: FTDI20000x64_vista is for 64bit vista OS. FTDI20000_winxp is for winxp and 32bit vista OS FTDI_win98 is for win98 OS...
Page 55
Pass and TV power on New FW version OSD display in the left-up of screen.
Page 56
Step4: Turn off TV with RC or Power key after EEPROM erase. Step5: Turn on TV and the FW update procedure completely Add.: enter factory model Input,6,2,5,8,0 with remote controller. Note: please do not adjust any other functions in factory model, in case of any problem irreparable! If any problem caused by adjust factory model, manufactory do not take any responsibility for that, thanks!
Disassembly / Assembly 1. take off base and stand a’ssy A. press knot as the below picture show, take off base B. take off the screw (108-S12-4031-1H) as below picture, then take off the stand arm screw...
Page 59
C. prepare take off the real cover as below picture Tool: pneumatic driver, cotton gloves, static electricity ring 2. Take off the screw of real cover A. loos screw Screw Screw...
Page 60
B.take off the real cover Tool: pneumatic driver, cotton gloves, static electricity ring 3. Take off LVDS cable and panel lamp cable Tool: cotton gloves A. take off the panel lamp cable form lunch box B. take off LVDS cable from panel...
Page 61
Note: the cotton gloves, static electricity ring should be needed 4. take off the small cover of CI A. loose the screw as below picture and take off the CI cover Tool: pneumatic driver, cotton gloves, static electricity ring screw screw...
Page 62
5. take off connected cable Tool: cotton gloves, static electricity ring A. take off speaker cable B. take off the cable of IR, key board and video 6. take off speaker A. take off the speaker from front bezel Tool: cotton gloves, static electricity ring...
Page 63
7. loose the screw of lunch box Tool: pneumatic driver, cotton gloves, static electricity ring A. take off the screw as below picture...
Page 64
Screw Screw Screw B. take off lunch box a’ssy 7. take off panel Tool: cotton gloves, static electricity ring A. take off the panel from front bezel...
Page 65
8. take off screw from panel tool: pneumatic driver, cotton gloves, static electricity ring A. loose the screw and take off the iron brace...
Page 66
Screw Screw 10. disassemble key board and front bezel Tool: cotton gloves, static electricity ring Screw A. take off the key board and earphones board from bezel...
Page 67
11. loos screw tool: pneumatic driver, cotton gloves, static electricity ring A. loose screw and take off the IR board Screw Screw Screw Screw 12. loose the screw of lunch box a’ssy Tool: pneumatic driver, cotton gloves, static electricity ring...
Page 68
b. loose screw of IO board E. loose tuner nut c. loose screw of HDMI connected location a. take off the iron brace of on/off d.loose the screw of VGA cabel 13. take off main board and power board Tool: pneumatic driver, cotton gloves, static electricity ring A.
Page 69
B. loose the earth wire screw of power board screw 14. take off tuner board and CI card Tool: static electricity gloves, static electricity ring a. take off digital cable b. take off CI card c. take off tuner board connecter...
Page 70
c. take off tuner board 15. take off screw of stand arm Tool: pneumatic driver, cotton gloves, A. loose the below screw and take off the stand arm srew Screw screw Srew Screw srew...
Page 80
Remote control unit key table Key Name Description / Function Data code Power Power Toggle C.C. function for USA Mute Mutes and restores your LCD TV sound Sleep Sets up the LCD TV sleep time Select and switch to a channel 10~19 Source Selects from different input signal...
Page 81
Menu To display the OSD menu Exit Exit the OSD menu 06,07,41,43, Allows to move, select and set up the OSD options SCALE Selects from the following modes setting:4:3, 16:9 Selects the MTS options: SAP, Stereo and Mono Display information on the LCD TV screen such us channel DISPLAY and channel label Switches back and forth between the current and previous...
Page 82
For RO to input specific “Legal Requirement” in specific NS regarding to responsibility and liability statements. Please check BenQ’s eSupport web site, http://esupport.benq.com, to ensure that you have the most recent version of this manual. First Edition (May , 2007)
Page 83
Content Index INTRODUCTIO3N ........................ 3 GENERAL DESCRIPTIONS ....................4 PRODUCT OVERVIEW ......................5 ..................... 5 PECIFICATION ......................19 ACKING ..................19 USTOMER CCEPTANCE LEVEL 1 COSMETIC / APPEARANCE / ALIGNMENT SERVICE ........22 & C ................22 ISUAL NSPECTION LEANING ............
Introduction Safety Notice Prior to using this service manual, please ensure that you have carefully followed all the procedures outlined in the user's manual for this product. (1) Read all of these instructions. (2) Save these instructions. (3) Follow all warnings and instructions are marked on the product. (4) Unplug this product from the wall outlet before cleaning.
General Descriptions This Service Manual contains general information. There are 2 levels of service: Level 1: Cosmetic / Appearance / Alignment Service Level 2: Circuit Board or Standard Parts Replacement Related Service Information BenQ Global Service Website: http://support.benq.com/front/benqmain.asp Support Website: http://bqpgsr.benq.corp.com/customize/asplogin.asp...
Page 87
Inputs & Connector types Signals Video Format Outputs F-TYPE Analog TV NTSC RCAx1+ RCAx2 VIDEO Video + L/R Audio CVBS VIDEO (Red, White) S-VIDEO S-VIDEO+ L/R Audio Mini Din 4 Pin S-VIDEO Component 480i, 576i, 480p, RCAx3+RCAx2 YPbPr (Y, Pb/Cb, Pr/Cr) YPbPr 576p, 720p, 1080i (Red, White)
Page 88
RCA jacks are all female type. Mini DIN CNC 4 Pins for S-video (SCN570S3NS00000), the pin assignment is described as below: 1: Ground 2: Ground 3: Y 4: C HDMI Format DVI 1.0 Level / Impedance 0.5~3.0Vp-p/100 Ohm (Differential),50 Ohm (Single ending) TMDS Mode Single Link Frequency...
Page 89
Format Y, Pb, Pr or Y, Cb, Cr Level / Impedance Y: 1.0Vp-p / 75Ω Pb/Cb, Pr/Cr: 0.7 ± 0.035Vp-p / 75Ω HDMI Timing V FREQ H FREQ STANDARD RESOLUTION 480p 720x480 31.46 576p 720x576 31.25 720p 1280x720 37.5 74.25 720p 1280x720 45.0...
Page 91
ITEM Equipments Requirement Procedure and SPEC Program Menu 1. Voltage Digital models Opposite white checks 1. Using voltage model to measure confirming screen output place, checking whether voltage is right. 1697 1280*800/60Hz 2. Connect Power, checking whether 1997 1440*900/60Hz Power LED present blue right 1.
Page 92
PC or Pattern 1. Press MENU Key to open OSD. Generator 2. Press VOL▲▼ Key to open VGA 3.1 VGA Setup Setup. 3. After finished, choose MENU to exit. PC or Pattern 32 grey scale picture 1. Press CH▲▼ Key to choose Auto Color then press VOL▲...
Page 93
PC or Pattern Opposite white checks 1. Press CH▲▼ Key to choose Color screen Generator temp. 1697 1280*800/60Hz d. Color temp 2.Press VOL▲ Key to enter. 1997 1440*900/60Hz 2. Press VOL▲ Key ,Set upon clients 2297/2097 requirements 1680*1050/60Hz PC or Pattern Full white picture 1.
Page 94
PC or Pattern Full white picture 1. Press MENU Key to open OSD. Generator 1697 1280*800/60Hz 2. Choose Picture. 1997 1440*900/60Hz 3. Press CH▲▼Key to select Color temp. 2297/2097 1680*1050/60Hz 4. Press VOL▲ Key to enter 5. Press VOL▲ Key to choose Cool. d-c.
Page 95
FLUKE 54200 1. Press CH▲▼Key To select Auto Full polychrome Color color bar 100_0 And then VOL▲ Key to enter 4.1 Auto color 2. To confirm Full polychrome is right. Color bar 100_0 PC or Pattern Preset mode 1. To confirm each adjustment values is 5.
Page 96
1. DVD PLAYER 1. Press SOURCE Key to select YPBPR. 2. VG-848 2. According to signal source, doing picture and voice test. 3. FLUKE 54200 3. Press MENU to open OSD. 6.3 YPBPR testing 4. Press CH▲▼Key to select and press VOL▲...
Page 97
1. DVD PLAYER 1. Press SOURCE Key to select S-VIDEO. 2. VG-848 2. According to signal source, doing 3. FLUKE 54200 picture and voice test. 3. Press MENU to open OSD. 6.6 S-VIDEO testing 4. Press CH▲▼ Key to select and press VOL▲...
Page 98
Receive picture is clear and fluent numeral signal Sound without noise 7. DT TV checkment 8. AUDIO PC or Pattern Any Patten 1. Press MENU Key to open OSD. adjustment Generator 2. Press VOL▲▼Key to choose Audio. Sound source 3. After finished, choose MENU to exit. 1.
Page 99
10. test in the factory PC or Pattern Opposite white checks 1. In User area, press CH▼ Key and area screen 1697 Power Key, then press CH▲ Key and Generator 1280*800/60Hz Power Key, then enter into factory area. 1997 1440*900/60Hz sing remote control...
15. First APS setup sing the remote control to press Menu +55800 Packing parts list. 005-U00-OF22BENQH OF2297B-UI1 BENQ LOGO CARTON RoHs OF2297B-UI1 CARTON LABEL FOR BENQ 120*100MM 003-401-BENQH RoHs 003-001-ALL-1H SHIPPING LABEL 78*18mm L150X3MROHS OF2297B-UI1 YELLOW LABEL ON CTN 100*100MM...
Page 101
Note: If BenQ defect undefined failure, and it judged that is reduce the merchandise ability, BenQ CM Inform this defect. After that parties make communication and decide how to solve.
Page 102
into following classes: 6.1 Critical defective A critical defective contains one or more critical and may also contain major and/or minor defects. 6.2 Major defective A major defective contains one or more defects and may also contain minor defects but contains no critical defect.
. Visual inspection shall be down with the distance from eyes to the sample 45 cm. . Display mode: Primary mode UXGA 60Hz 11.0 TEST EQUIPMENTS 11.1 BenQ PCs with BenQ display adapter or other specific display adapter, which is agreed upon by both parties 11.2 Test program by BENQ...
Page 104
ITEM Equipments Requirement Procedure and SPEC Program Menu 1. voltage confirming Digital models Opposite white checks 1. Using voltage model to measure output screen place, checking whether voltage is right.. 1697 1280*800/60Hz 2. Connect Power, checking whether Power LED present blue right 1997 1440*900/60Hz 2.
Page 105
PC or Pattern 1. Press MENU Key to open OSD. 3.1 VGA Setup Generator 2. Press VOL▲▼Key to open VGA Setup. 3. After finished, choose MENU to exit. PC or Pattern 32 grey scale picture 1. Press CH▲▼Key to choose Auto Color then press VOL▲...
Page 106
PC or Pattern Opposite white checks 1. Press CH▲▼Key to choose Color screen Generator temp. 1697 1280*800/60Hz d. Color temp 2.Press VOL▲ Key to enter. 1997 1440*900/60Hz 2. Press VOL▲ Key ,Set upon clients 2297/2097 requirements 1680*1050/60Hz PC or Pattern Full white picture 1.
Page 107
PC or Pattern Full white picture 1. Press MENU Key to open OSD. Generator 1697 1280*800/60Hz 2. Choose picture. 1997 1440*900/60Hz 3. press CH▲▼Key to select Color temp. 2297/2097 4. press VOL▲ Key to enter 1680*1050/60Hz 5. press VOL▲ Key to choose Cool. d-c.
Page 108
FLUKE 54200 1. Press CH▲▼Key To select Auto Full polychrome Color color bar 100_0 4.1 Auto color And then VOL▲ Key to enter 2. To confirm Full polychrome is right. Color bar 100_0 PC or Pattern Preset mode 3. To confirm each adjustment values is right and then press Power off.
Page 109
1. DVD PLAYER 1. Press SOURCE Key to select YPBPR. 2. VG-848 2. According to signal source , doing picture and volume test. 3. FLUKE 54200 3. Press MENU to open OSD. 6.3 YPBPR testing 4. Press CH▲▼Key to select and press VOL▲...
Page 110
1. DVD PLAYER 1. Press SOURCE Key to select S-VIDEO. 2. VG-848 2. According to signal source , doing picture and volume test. 3. FLUKE 54200 3. Press MENU to open OSD. S-VIDEO 4. Press CH▲▼Key to select and press testing VOL▲...
Page 111
Receive picture is clear and fluent numeral signal Sound without noise 7. DTV checkment 8. AUDIO adjustment PC or Pattern Any Patten 1. Press MENU Key to open OSD. Generator 2. Press VOL▲▼Key to choose Audio. Sound source 3. After finished, choose MENU to exit. 8.1 Sound mode 1.
Page 112
11. Speaker function PC or Pattern 1. press VOL▲▼Key to VOLUME . examination Generator 2. adjust ▲ ▼Key to examine whether controlled value. 3. Check if the volume out of true. control 1. PC or Pattern 1. Check if in any mode ,each function is 12.remote function testing normal.
Page 114
** OPERATION INSTRUCTION ** ** OPERATION INSTRUCTION ** 1.Use the USB cable connect the PC with ISP board,then connect the ISP board with the machine which will be upgraded by VGA cable; 2. Insert the AC POWER cable into LCD TV from the back a.
Page 126
Notice: For RO to input specific “Legal Requirement” in specific NS regarding to responsibility and liability statements. Please check BenQ’s eSupport web site, http://esupport.benq.com, to ensure that you have the most recent version of this manual. First Edition (March, 200X)
Page 127
Content Index Level 3 - Component Repair to Circuit Boards ..................3 Theory of Circuit Operation ...................... 3 Circuit Schematics ........................3 PCB Artwork ..........................16...
Page 128
Level 3 - Component Repair to Circuit Boards Theory of Circuit Operation Circuit Schematics...