Remote Control Usage Tips; Test The Remote Control - BenQ VK Series User Manual

Remote control usage tips

• Point and aim the top front of the
remote control directly at the TV when
pressing the buttons.
• The remote control must be held at an
angle within 30 degrees of the TV's
remote control sensor window to
function correctly. The distance
between the remote control and the
sensors should not exceed 7 meters.
• Do not cover the sensor window on the front of the TV (beside the power
indicator lamp), or place objects in front of it which will block the direct line-
of-sight between the remote control and the sensor window on TV.
• Do not let the remote control become wet, or place it in humid environments
(like bathrooms.)
• If the remote control sensor window on the TV is in direct sunlight or strong
light, the remote control may not operate properly. In this situation, change the
light source or readjust the angle of your TV, or operate the remote control from
a location closer to the remote control sensor window on the TV.

Test the remote control

Press the
(Power/standby)
highlighted in the illustration). The TV should turn on, and
the power indicator change to green. If so, progress to the
next step (See "8. Initialize your TV" on page
If the TV does not turn on, first check that the power is
available (the power indicator will be lit red). If so, try
pressing the
(Power/standby)
turns on by this method, the problem lies with the remote
control. In that case, check that the remote control batteries
are properly installed. If need be, replace the batteries with
new ones or known good ones.
To put the TV to standby mode, press the
button on the remote control, or the
button on the TV again, and the TV will return to standby
mode (the power indicator will turn red.)
7 meters
30 degrees
button on the remote control (as
8).
button on the TV. If the TV
(Power/standby)
(Power/standby)
Section 1: Quick Start Guide 7