Using The Remote Control; Power On, Off And Standby; Turning On The Tv; Switching Inputs - BenQ SE2231 User Manual And Quick Start Manual

Using the remote control

Power on, off and standby

Turning on the TV

After plugging the TV's power cable into a wall outlet and turning on the main power
switch, the TV will enter standby mode automatically. The power indicator will light up
red. Press (Power) on the remote control. The TV will turn on and the power indicator
will change to Green.
Putting the display to standby
Press (Power) on the remote control again, and the TV will return to standby mode.
The power indicator will turn red.
 The display still consumes a very small amount of power (about 1W) in standby mode.
Turning the display off
You can turn the display power off by flipping the main power switch on the display to the
OFF position. The power indicator will be off.

Switching inputs

1. Turn on all connected equipment or devices
before selecting an input.
2. Press 信号选择
selected input. Press 信号选择
▲▼ button to select your desired input then
press OK button to confirm. You can also press
信号选择
different input sources.
 Be aware that HDMI input must be HDCP-compliant to be displayed.
When switching to the HDMI inputs, the display needs several seconds to detect the HDCP
information from the signal source and no image will be displayed during this period. This is
not a malfunction.

Adjusting sound setting

Adjusting volume

 Press 音量 + on the remote control to increase volume. The volume indicator increases
in length as volume rises.
 Press 音量 - on the remote control to decrease volume. The volume indicator decreases
in length as volume falls.

Mute setting

Press 静音
Press 静音
Select TV/Video sound mode
 When watching TV programs, press Sound 声音类型 on your remote contrl, and the
sound mode will toggle among "Mono", "Stereo", "Dual1", and "Dual2".
 When the selected input is Video, press Audio 音效模式(音场模式) on your remote
control, the audio mode will toggle among "Classic", "POP", "JAZZ", and "ROCK".
 The available options will be depend on what your local TV system or your Video input provides.
on the TV to view the current
continuously to switch between
on the remote control to turn off the sound temporarily.
once more, or press 音量 + to restore the sound level.
button, use
Using the remote control 21