Connect The Antenna Cable; Connect The Power Cord - BenQ VK Series User Manual

4. Secure the stand onto the TV using the screws and a suitable screwdriver
(screw tightening torque: 8~10 kgf-cm).
5. Carefully lift the TV upright and check the installation. Move the TV to the
position where it will be placed.

5. Connect the antenna cable

Connect a TV antenna cable fly-
lead from your TV antenna
system or Cable TV (CATV)
decoder box to the ANTENNA/
TV input socket on the TV. Make
sure that the cable connection is
firmly in place.
• A poor quality TV signal will
produce a poor picture and/or
sound on your TV. For high
quality picture and sound, you
will need a high quality TV signal.
Depending upon your location,
for best TV signal reception, you
should have a properly aligned
outdoor TV antenna system. If
need be, consult a professional
antenna specialist.
• This TV has a built-in analog TV tuner, which requires the TV antenna cable
connection to an external TV antenna system or CATV decoder. If you wish to
make use of the digital LCD screen to view digital TV, you should connect an
external digital TV tuner (decoder) set top box (STB) to the TV using a digital
signal cable (HDMI or DVI) connection.

6. Connect the power cord

1. Locate the power cord from the packaging, and plug the appropriate end
into the AC IN socket on the rear of the TV (as illustrated below).
Power outlet
AC IN socket
(VK3211)
Power cord
(SK3731)
ANTENNA/TV socket
Section 1: Quick Start Guide
Antenna
cable
5