Activate The Remote Control - BenQ VK Series User Manual

2. Plug the other end into an appropriate wall power outlet, and turn on the
switch (if the power outlet is switched). The TV will enter standby mode
and the power indicator will light up red.
• The supplied power cord is suitable for use with 100-240V AC power only.
• The type of power cord plug and socket illustrated may differ from the type used
in your region.
• Only use an appropriate power cord for your region. Never use a power cord
which appears damaged or frayed, or change the plug type on the power cord.
• Be aware of the total loading when using extension cords or multiple outlet
power boards.
• This TV has no power switch. When installing the TV, incorporate a readily
accessible disconnect device in the fixed wiring, or connect the power cord to
socket-outlet which must be provided near the TV and easily accessible. If a
fault should occur during operation of the unit, operate the disconnect device to
switch the power supply off, or disconnect the power cord.
• WARNING: This TV has been engineered and manufactured with the highest
priority on safety, however, IMPROPER HANDLING OR USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. Please handle this TV with
care. If damaged, turn off the power and unplug the power cord from the TV.
Transport the TV to your nearest BenQ authorized service centre for repair.
• There are no user serviceable parts in this TV. Never unscrew or remove any
covers. There are dangerous voltages inside. Turn off the power and unplug the
power cord before moving the TV.

7. Activate the remote control

1. Locate the remote control and batteries from the
packaging, and unwrap them.
Be cautious when handling batteries. See
notice" on page 42
2. Turn the remote control to reveal its back side, and
open the lid of the battery compartment.
3. Insert the supplied batteries ensuring that the
positive and negative marked battery terminals
match the (+) and (-) marks in the battery
compartment.
These batteries are provided for your convenience so
that you can operate the TV straight away. You should
replace them as soon as possible.
4. Refit the lid of the battery compartment as shown.
6 Section 1: Quick Start Guide
for more information.
"Battery safety