Fitting The Sewing Lamp - DURKOPP ADLER 581 Additional Instructions

2
In order to be able to fit the parts set, you must remove the existing
components.
When doing so, comply with the following
Sequence:
1. Remove the clamping plates.
2. Remove the finger protection.
3. Detach the housing.
4. Detach the head cover.
5. Remove the head cover.
6. Remove the housing.
Now you can fit the new housing with the printed circuit board.
4

Fitting the sewing lamp

WARNING
Risk of electric shock from live parts!
Dangerous injuries to life and limb possible.
The sewing light may only be fitted by qualified
specialists.
Switch off the machine and unplug the power plug.
Make sure the power plug cannot be
unintentionally reinserted.
Fitting the sewing lamp
Additional Instructions 581 - 00.0 - 02/2015