Fiat 500X Owner's Handbook Manual page 85

FITTING AN ISOFIX
RESTRAINT SYSTEM
84) 85) 86)
The rear side seats of the vehicle are
equipped with ISOFIX attachments, for
fitting child restraint systems quickly,
simply and safely.
The ISOFIX system allows the ISOFIX
child restraint systems to be fitted,
without using the vehicle's seat belt,
but directly securing the child restraint
system to three anchorages present on
the vehicle.
Traditional child restraint systems can
be fitted alongside ISOFIX child restraint
systems on different seats in the same
vehicle.
To install an ISOFIX child restraint
system, attach it to the two metal
anchorages A fig. 77 located where the
rear seat cushion meets the backrest,
then fix the upper strap (available
together with the restraint system) to
the dedicated anchorage B fig. 78
located at the bottom behind the
backrest.
fig. 79 shows an example of a Universal
ISOFIX child restraint system for weight
group 1.
IMPORTANT The fig. 79 is indicative
and for assembly purposes only. Fit the
child restraint system according to
the instructions, which must be
included.
CHILD
77
78
NOTE When a Universal ISOFIX child
restraint system is used, only ECE R44
"ISOFIX Universal" (R44/03 or further
upgrades) type-approved child restraint
systems can be used (see fig. 80).
The other weight groups are covered
by specific ISOFIX child restraint
systems, which can be used only if
specifically tested for this vehicle (see
list of vehicles provided with the child
restraint system).
F1B0114C
79
F1B0115C
80
F1B0116C
F1B0117C
83