Fiat 500X Owner's Handbook Manual page 23

With the ignition device turned to MAR,
the instrument panel and the various
controls on the dashboard will be lit up
when the exterior lights are switched
on.
AUTO FUNCTION
(Dusk sensor)
(where provided)
This is an infrared LED sensor that
works in conjunction with the rain
sensor and is located on the
windscreen. It is able to detect
variations in outside lighting based on
the light sensitivity set in the display
Menu or the Uconnect™ system.
The higher the sensitivity, the lower the
amount of external light needed to
automatically switch the external lights
on.
Function activation
Turn the light switch ring nut to AUTO.
IMPORTANT The function can only
be activated with the ignition device at
MAR.
Function deactivation
To deactivate the function, turn the light
switch ring nut to a position other
than AUTO.
DIPPED BEAM
HEADLIGHTS
Turn the light switch ring nut to
side lights, dipped beam headlights and
instrument panel will light up; the
warning light will come on on the
latter.
DAYTIME RUNNING
LIGHTS (DRL)
"Daytime Running Lights"
18) 19)
With the ignition device turned to MAR
and the light switch ring nut turned to
position O the daytime running lights
are automatically activated (the other
lights and interior lighting remain off).
FOG LIGHTS
(where provided)
Press the button to turn on the fog
lights with side lights and dipped beam
headlights on.
When the fog lights are on, the side
lights and number plate lights are also
on, while the daytime running lights
are off.
Press the button again or turn the
switch ring nut to O in order to switch it
off.
REAR FOG LIGHT
The button that controls switching on
:
and off of the rear fog light is integrated
into the light switch.
Press the button to turn on the rear
fog light with side lights and fog lights
on.
PARKING LIGHTS
These lights can be switched on with
ignition device at STOP or with key
removed, by moving the light switch
ring nut to position O and then to
position , the switch will go back
to position O.
The warning light switches on in
the instrument panel.
HEADLIGHTS OFF TIMER
(Follow me home)
Activation
With headlights on, bring the ignition
device to STOP.
Within 45 seconds, turn the light switch
ring nut to O: the set timing starts.
Deactivation
This function is deactivated by
switching on the headlights, the side
lights or bringing the ignition device to
MAR.
21