Fiat 500X Owner's Handbook Manual page 18

Backrest angle adjustment
Move lever C to adjust the backrest
angle, accompanying it with the
movement of the torso (operate the
lever until the desired position is
reached, then release it).
Electric lumbar adjustment
When the ignition device is at MAR,
press button A fig. 14 to adjust the
lumbar area support, until the maximum
driving comfort is achieved.
14
ELECTRICALLY
ADJUSTABLE FRONT
SEATS
5)
The buttons for electrical seat
adjustment are on the outer side of the
seat, near the floor.
16
These buttons can be used to adjust
the height, the lengthwise position
in relation to the vehicle and the angle
of the backrest.
15
Height adjustment
Use the front or rear part of the switch
A fig. 15 to modify the height and/or the
angle of the seat cushion.
Longitudinal adjustment
Push switch A forwards or backwards
F1B0016C
to move the seat in the corresponding
direction.
Backrest angle adjustment
Push switch B forwards or backwards
to adjust the backrest in the
corresponding direction.
Electric lumbar adjustment
Use the joystick C to actuate the
lumbar area device until the maximum
driving comfort is achieved.
IMPORTANT The electrical adjustment
is only allowed when the ignition device
is turned to MAR and for about 3
minutes after it is turned to STOP. With
vehicle AT A STANDSTILL, after
passing from closed door to open door,
adjustment will be possible for 3
further minutes.
FRONT SEAT ELECTRIC
F1B0018C
HEATING
With ignition device at MAR, press
buttons fig. 16 on the dashboard.
16
You can select two heating levels:
❒ "minimum heating": (one orange LED
lit on the buttons);
F1B0021C