Fiat 500X Owner's Handbook Manual page 216

Lights (where provided)
This function can be used to carry out
the following adjustments:
❒ "Interior lights" (where provided):
allows you to select the interior light
brightness;
❒ "Headlamp sensor" (where provided):
adjustment of headlamp activation
sensitivity;
❒ "Follow me" (where provided):
permits the setting of the headlamp
deactivation delay after switching off
the engine;
❒ "Courtesy lights": activation/
deactivation of courtesy lights (where
provided);
❒ "Day lights": activation/deactivation of
the daytime running lights (DRLs)
(where provided);
❒ "Auto high beams" (where provided):
allows you to deactivate the main
beam headlights when approaching a
vehicle coming from the opposite
direction;
❒ "Flash Lights w/Lock" (where
provided): permits the activation of light
flashing when the doors are locked.
214
MAIN NAVIGATION MENU
IMPORTANT Navigation maps are
pre-loaded on the system, therefore no
external support is needed.
To activate the main navigation menu,
press the NAV button on the front
panel, then press one of the following
buttons:
❒ "Where to?": it searches or navigates
to the destination;
❒ "View map": it displays the map;
❒ "Info": it displays all info about
navigation;
❒ "Emergency": it searches for
Hospitals or Police Stations located
near the destination. It is also possible
to view your current position on the
display and save, in "Favourites", the
location of the Hospitals or Police
Stations.
VIEW MAP
Press the "View Map" button in the
main Navigation Menu to display the
map relative to the current position.
When the display shows the map, the
following options are available:
❒ "Menu": press this button to return
to the main Navigation Menu;
❒ "+/–": press the "+" or " –" button to
change the dimension of the map (it
is not possible to zoom in on minor
roads);
❒ "Time of Arrival/Time to
Destination/Distance" (only during
navigation): press this button at the top
right of the display to view one of the
following options: "Time of Arrival",
"Time to Destination", "Distance".
❒ "Turn List" (only during navigation):
press the list of turns along the route
at the middle of the top of the display.
Select a turn through the following
options: "Show on Map" or "Avoid
Street".
❒ "Options": press this button to
display the map display options.
INFORMATION
Press the "Information" button in the
main Navigation Menu to select from
the following information:
❒ Where Am I?
❒ Traffic
❒ "Trip comp." (Trip Computer)
You can press the button to return
to the previously active screen or the
"X" button to exit.