Fiat 500X Owner's Handbook Manual page 214

SMS MESSAGE READER
The system can read the messages
received by the mobile phone.
To use this function the mobile phone
must support the SMS exchange
function through Bluetooth®.
If this function is not supported by the
phone, the corresponding
deactivated (greyed out).
When a text message is received, the
display will show a screen where the
options "Listen", "Call" or "Ignore" can
be selected.
The list of SMS messages received
from the mobile phone can be
accessed by pressing the
APPS MODE
Press the APPS button on the front
panel to display the following settings:
❒ Media/Radio mode
❒ Clock
❒ General information
❒ Compass
❒ Trip
Media/Radio mode
Pressing the button on the left side of
the display allows you to display the
"Media and Radio" information.
212
Clock
Pressing the time at the middle of the
top of the display allows you to set the
time.
General information
The general information about the
vehicle is displayed in the central part of
button is
the display:
❒ the outside temperature, expressed
in the selected unit of measurement;
❒ mobile phone battery charge (when a
mobile is paired);
❒ the
icon (if a Bluetooth® device is
connected);
button.
❒ phone network signal intensity (if a
mobile phone is connected).
Compass
Press the "Compass" button to display
the direction in which you are driving
and "Navigation mode" information.
Trip
Press the "Trip" button to access the
screens containing the Trip Computer
information processed by the
instrument panel.
SETTINGS
Press the button on the front panel
to display the "Settings" menu.
NOTE The menu items displayed can
vary according to the versions.
The menu includes the following items:
❒ Display;
❒ Units;
❒ Voice commands;
❒ Clock & Date;
❒ Safety & Driving Assistance;
❒ Lights;
❒ Doors & Locks;
❒ Vehicle Shutdown Options;
❒ Audio;
❒ Phone/Bluetooth;
❒ Sirius XM Setup (where provided);
❒ Radio Setup;
❒ System Information;
❒ Restore Default Settings;
❒ Clear Personal Data.
Safety & Driving
Assistance
(where provided)
This function can be used to carry out
the following adjustments:
❒ "Rear View Camera" (where
provided): allows you to activate the
display of images from the camera
when reverse is engaged.