Fiat 500X Owner's Handbook Manual page 202

❒ "Lane Assist Strength" (where
provided): this function can be used to
select the force to apply to the steering
wheel to put the vehicle back in the
lane through the electric steering
system, in the event of Lane Assist
system intervention.
❒ "Blind Spot Alert" (where provided):
this function can be used to select
the type of warning ("Sound Only" or
"Sound & Display") to indicate the
presence of objects in the blind spot of
the door mirror.
❒ "Rain sensor" (where provided): this
function can be used to activate/
deactivate the automatic operation of
the wipers in the event of rain.
❒ "Brakes" (where provided): this
function can be used to select the
following submenus:
- "Brake Service" (where provided):
allows you to activate the procedure for
carrying out braking system servicing;
- "Auto Park Brake" (where provided):
allows you to activate/deactivate the
automatic park brake engagement.
200
NAVIGATION
(Uconnect 5" Radio Nav only)
Programming a route
IMPORTANT In the interest of safety
and to reduce distractions while you are
driving, you should always plan a route
before you start driving.
To plan a route, do the following:
❒ tap the screen to open the Main
menu;
❒ Tap "Navigate to" or "Drive to".
❒ Tap "Address". You can change the
country or state setting by tapping
the flag before you select a city.
❒ Enter the town or city name, or the
zip code. Towns with similar names are
shown in the list while you type. When
the desired city or town appears in
the list, tap the name to select the
destination.
❒ Enter the street name. Streets with
similar names are shown in the list while
you type. When the correct street
name appears in the list, tap the name
to select the destination.
❒ Enter the house number, then tap
"Done".
❒ The location will be shown on the
map. Tap "Select" to continue or tap
"Back" to enter another address.
❒ When the new route is shown, tap
"Done". For more information about the
route, tap "Details". To change your
route, for example, to travel via a
particular location or to select a new
destination, tap "Change route".
You are guided to your destination,
using spoken instructions and
on-screen directions.
Map updating
Two modes for downloading a map
update are available:
❒ Most recent maps guarantee: if a
new map is available for your system
within 90 days of initial use, you can
download it once free of charge.
❒ Map update: you can purchase a
new version of the map installed on
your system.
USB device setup
To update the map, use an USB device
that meets the following requirements:
❒ Ideally, the USB device should be
empty.
❒ The USB device must have at least
8 GB of memory free.
❒ The USB device must use a FAT-32
file system.
❒ The USB device must not be blocked
and must allow files to be saved.