Ricoh CH-C1 Technical Bulletin page 135

T B
echnical ulletin
PAGE: 4/6
Reissued:29-May-14
Model: Date: No
Model CH-C1 09-Nov-13 .: RD135048a
3. Remove the drawer unit lock motor block [A].
Note:
1. When mounting the motor block, screw the motor in first. Then, assemble links [A], [B] and [C] as shown
below. There is also a diagram embossed on the motor cover to help you to install the links correctly.
2. Lock shaft (Cut surface to the upper left) [A]
3. Link (Long hole to the right) [B]
4. Paper transfer roller shaft (Cut surface to the lower side) [C]
4. Remove the inner cover [A]. ( x 2, x 1)