Fan Blade Assembly - Hunter ORIGINAL Instructions Manual

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE
BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE
BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS IN
BETWEEN ROTATING FAN BLADES.

Fan Blade Assembly

1. Insert blade grommets, found in the
2. Using a #2 Phillips-head screwdriver, attach each blade to a blade iron using three blade assembly
screws, found in the
3. For each blade, insert one blade mounting screw, found in the
and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both
mounting screws (See Fig. 14) using a #2 Phillips-head screwdriver.
NOTE: With the Hunter Original, you have an option to install either four or five blades. For five blades,
mount to the outer row of holes on the motor. For four blades, use the inner row (see Fig. 15).
Grommet
Blade
Grommet
Fig. 13
Fig. 15
Hunter Fan Company
Fan Blade Assembly
! CAUTION
hardware bag, by hand into the holes on the blades (see Fig. 13).
hardware bag (see Fig. 14).
Inner Row
Outer Row
12
!
hardware bag, through the blade iron,
Blade
Mounting
Screw
Fig. 14
Blade
Assembly
Screws
41532-01 • 04/13/18