Pre-Installation - Hunter ORIGINAL Instructions Manual

Pre-Installation

Select installation site: Normally this is near the center of the room, often replacing a light fixture. Make
certain that ample clearance is left for the rotating fan blades. For maximum efficiency, no obstruction
(walls, posts, etc.) should be within 30" of the tips of the blades (see Fig. 1).
Your Hunter fan comes with the proper hardware to hang the fan from a 8 foot ceiling so the fan
blades will be 12" from the ceiling and approximately 7 feet from the floor (see Fig. 1).
NOTE: On vaulted ceilings, up to 45° pitch, you may want to use the Hunter Angled Ceiling Mounting
Kit, which can be purchased via our website or by calling 1- 888-830-1326.
LET MOTOR REST IN THE CARTON LINER FOR PROTECTION.
12" Minimum
7' From Floor
Fig. 1
Hunter Fan Company
Pre-Installation
! CAUTION
NEVER LIFT THE MOTOR BY THE WIRES.
Support
Structure
Standard
Mounting
Style
Use Standard Mounting to hang the
fan from a flat ceiling.
5
!
Ceiling
Outlet Box
(required)
41532-01 • 04/13/18
30" Clearance