Fan Blade Assembly - Hunter Ceiling Fans Installation And Operation Manual

Hide thumbs Also See for Ceiling Fans:

Table of Contents

TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND THE BLADE

BRACKETS WHEN INSTALLING THE BRACKETS, BALANCING THE

BLADES, OR CLEANING THE FAN. DO NOT INSERT FOREIGN OBJECTS

IN BETWEEN ROTATING FAN BLADES.

Fan Blade Assembly

1. Your fan may include blade grommets. If the fan has grommets, insert them by hand into the holes

on the blades (see Fig. 13).

2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the

blades may appear slightly loose after the screws are tightened. This is normal (see Fig. 14).

3. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the

fan. Insert the second blade mounting screw, then securely tighten both mounting screws.

NOTE: With some fans you have an option to install four or five blades. For five blades, mount to the

outer row of holes on the motor. For four blades, use the inner row (see Fig. 14).

Grommet

Blade

Grommet

Fig. 13

Hunter Fan Company

Fan Blade Assembly

CAUTION

Blade

Mounting

Screw

Outer Row

Inner Row

Blade

Assembly

Screws

Fig. 14

41532-01 • 10/14/13

Table of Contents

Original