Installing The Canopy - Hunter ORIGINAL Instructions Manual

NOTE: Your canopy comes pre-assembled. Uninstall the canopy screws using a #1 Phillips-head
screwdriver and separate the two halves of the canopy before continuing to step 1.
1. Assemble canopy halves around pipe, and loosely install the canopy assembly screws.
2. Slide canopy up close to ceiling.
3. Tighten the canopy assembly screws (see Fig. 10) using a #2 Phillips-head screwdriver.
4. Tighten the canopy set screw (see Fig. 10) using a #1 Phillips-head screwdriver.
Canopy Set Screw
Fig. 10
Hunter Fan Company

Installing The Canopy

10
Canopy
Canopy Assembly
Screw
41532-01 • 04/13/18