Table of Contents
Advertisement
Swing the fan up to align the
canopy screw holes with the
mounting holes on the ceiling plate.
Note: The slots in the canopy must
remain engaged while swinging the
canopy for alignment.
Partially install a canopy screw, found
in the
hardware bag, between
the ceiling plate hooks. When all the
holes are properly aligned, securely
tighten all three canopy screws.
Note:
Fan style may vary.
Ceiling Bracket
Hanging Fan
Installing the Canopy
1 of 3
Canopy
Screws
bag
Wiring
Hold the canopy up with the screw holes
aligned. Partially install two canopy screws,
found in the
hardware bag, into the
holes opposite the ceiling plate hooks.
Using both hands, push the canopy trim
ring up to the top of the canopy. The canopy
trim ring will snap and lock into place.
Note: Should you need to remove the trim ring,
press firmly on opposite sides of the trim ring. The
tabs will flex out releasing the canopy trim ring.
Canopy
Blades
1886
2 of 3
Canopy
bag
Screws
6
Wall Control
Advertisement
Table of Contents
