Table of Contents
Advertisement
54 Driver information system ›
Hold - Show main menu
Driving data
Overview
The driving data display works with the ignition
switched on.
In the instrument cluster display
Depending on the equipment, the display of the in-
strument cluster shows information such as speed,
fuel consumption, range, etc.
Information on the quality of natural gas
For natural gas vehicles, the display of the instru-
ment cluster shows the natural gas quality in percent
from 70% to 100%. The higher the value, the lower
the consumption of natural gas.
In infotainment
Distance travelled
A
Driving time
B
Average speed
C
Average fuel consumption
D
Graphical fuel gauge - If the expected range is
E
less than 300 km, the vehicle slowly approaches
the symbol
Range (for natural gas vehicles, the range with
F
petrol, CNG and the sum of the ranges with both
fuel types are displayed separately).
Memory
The system saves the driving data in the following
memories.
Since start
Driving data from the time of switching on the ig-
▶
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long-term
The driving data of all trips up to a total of 99
▶
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
Driving data
Since refuel
Driving data from the time the fuel tank was last
▶
filled is stored in the memory. The memory is reset
the next time the tank is filled.
Operation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
›
The menu item for the driving data in the main
menu in the display of the instrument cluster.
Display driving data in the display of the instru-
ment cluster via the operating lever
›
The menu item for the driving data in the main
menu in the display of the instrument cluster.
Displaying driving data in the infotainment system
The driving data is displayed in the menu in the info-
tainment system.
Or:
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
Rotate - Select in-
A
formation/Set values
Press - Confirm in-
formation
Press - Select infor-
A
mation/Set values
Press - Confirm in-
B
formation
Menu item for driving data
Menu item for the driving data
›
To set the memory for
the displayed driving
data, press selection
wheel
A
›
To resetthe memory ,
hold the dial
repeatedly.
.
A
Advertisement
Table of Contents
