Table of Contents
Advertisement
158 Storage space and interior equipment ›
Disconnecting
›
Hang the clamps for removing the wheel trims at
the edge of one of the openings in the trim.
›
Push the wheel wrench through the clamp, support
on the tyre and pull off the wheel trim.
Installing
›
Press the wheel trim onto the wheel rim at the
designated valve opening.
When using an anti-theft wheel bolt, it must be lo-
cated at the location indicated on the bezel.
›
Press the trim, starting at the valve, into the rim on
both sides until it engages around the entire cir-
cumference.
NOTICE
Use hand pressure, do not hit the wheel cover.
▶
Equipment in the boot
Storage space and interior
equipment
Equipment in the boot
Overview
Boot of a vehicle without natural gas drive
Storage tray
A
Max. load 2.5 kg
The partition wall of the storage compartment
on vehicles with the variable loading floor cannot
be removed.
Trailer hitch switch
B
Removable light
C
Under the floor covering: Storage compartment
D
for spare or emergency wheel and vehicle tools
Load on floor covering max. 75 kg
12 volt socket
E
Storage tray
F
Max. load 1.5 kg
Boot of a natural gas vehicle
Storage tray
A
Max. load 2.5 kg
Trailer hitch switch
B
Removable light
C
Under the floor covering: Storage compartment
D
for on-board tools
Load on floor covering max. 75 kg
12 volt socket
E
Storage tray
F
Max. load 1.5 kg
Advertisement
Table of Contents
