Vehicle Driving Mode - Skoda KAMIQ 2020 Owner's Manual

Hide thumbs Also See for KAMIQ 2020:
Table of Contents

Advertisement

If the engine threatens to over-rev
The gearbox automatically changes to the next
higher gear.
The transmission prevents changing to the next
lower gear.
Troubleshooting
The selector lever cannot be moved out of posi-
tion in the normal way
Mechanically unlock the selector lever
Gearbox overheated
illuminates together with
or
illuminates together with
Message regarding the gearbox overheating
You may continue driving, exercising appropriate
caution.
illuminates together with
or
illuminates together with
Message regarding the gearbox overheating
Stop driving! Stop the vehicle and stop the engine.
After the indicator light goes out, your journey can
continue.
If the warning light does not go out, stop driving!
Seek the help of a specialist garage.
Gearbox impaired
illuminates together with
or
illuminates together with
Message regarding the gearbox in emergency
mode
You may continue driving, exercising appropriate
caution.
Immediately seek the help of a specialist garage.
illuminates together with
or
illuminates together with
Message regarding a gearbox fault
Stop driving! Seek the help of a specialist garage.
Starting up a vehicle that is stuck
Adjust the selector lever between
vehicle will then start to rock and be easier to free.
Starting and driving ›
Mechanical release of automatic gearbox
Secure the vehicle with the parking brake.
» page
121.

Vehicle driving mode

Usage
The driving mode offers the possibility of adapting
the driving behaviour to the desired driving style.
Overview
Information about the selected driving mode is dis-
played in the status bar in the Infotainment screen as
well as in the digital instrument cluster.
Eco mode
Eco mode is suitable for a relaxed driving style and
helps to save fuel.
Normal mode
Normal mode is suitable for a normal driving style.
Sports mode
Sport mode is suitable for a sporty driving style.
Individual mode
Individual mode allows the individual configuration of
certain vehicle systems.
and . The
Vehicle driving mode
121
Insert a flat-head
screwdriver or push a
similar tool into the
gap in the area of ar-
row
.
A
Carefully loosen and
lift the quadrant cover.
Push the foam insert
away until the yellow
release lever is visible.
Press with the vehicle
key on the release lev-
er, and at the same
time, press the key in
the selector lever.
Put the selector lever
in position.

Advertisement

Table of Contents
loading

Table of Contents