Table of Contents
Advertisement
Fan Coil Actuator FCA 2
Objects and links
Table 50: Temperature controller links with the fan coil actuator.
RAM 713 FC
No.
Object name
7
Heating actuating value
8
Cooling actuating value
Fan stage in forced
16
operation
17
Fan Forced/Auto
0
Manual setpoint offset
Table 51: Meteodata weather station links with the fan coil actuator.
Meteodata 140 S
No.
Object name
4
Temperature value
Table 52: Presence detector links with room thermostat.
thePrema P360
No.
Object name
Presence channel C4.1
31
- switching
Table 53: Time switch links with room thermostat.
TR 648 top2 RC KNX
No.
Object name
C1.1 switching channel
7
– HVAC operating
mode
* 1 = Comfort, 2 = Standby, 3 = Night, 4 = frost/heat protection.
Updated: Feb-16 (subject to changes)
FCA 2
No.
Object name
0
Heating actuating value
1
Cooling actuating value
Fan stage in forced
8
operation - fan control
via % value
15
Fan Forced/Auto
19
Adjust setpoint
FCA 2
No.
Object name
18
Outdoor temperature
RAM 713 FC
No.
Object name
4
Presence
RAM 713 FC
No.
Object name
3
Operating mode preset
Comment
FCA receives the heating
actuating value.
FCA receives the cooling
actuating value.
% value for forced operation
enables the manual selection of
fan stage on the
RAM 713 FC
For setpoint adjustment in
cooling mode
Comment
Outdoor temperature for
setpoint adjustment
Comment
Presence signal for change
over to comfort mode
Comment
Changes the HVAC operating
mode* depending on the time
of day.
Page
66
89
of
Advertisement
Table of Contents
